# C64-PSU-Combi
A PSU for the Commodore C64 and up to two 1541-II floppy disk drives. It is based on a transformer 
for the 9VAC, which is required in a C64 and a (PCB) external power supply module, which provides
the +5V and +12V for the C64 and the 1541-II floppy disk drives. Depending on the used power supply
module, one of the 1541-II connectors can be replaced with an Amiga connection, which also requires 
-12V. This option has not been tested, since I don't have an Amiga. The PSU combi should be strong 
enough.

<img src="https://github.com/svenpetersen1965/C64-PSU-Combi/blob/master/Rev.%202/pictures/CombiPSU_wiring_Rev2_wbgnd.png" width="500" alt="Block Diagram">

This build is for the more experienced, since power supplies can be hazzardous and the involved 
mains voltage is potentially lethal.

Find some info on the required cable making <a href="http://tech.guitarsite.de/cable_making.html">on my website</a>

The power supply has  an open concept and can be configured to taste. It should be planned before 
parts are purchased.

<img src="https://github.com/svenpetersen1965/C64-PSU-Combi/blob/master/Rev.%200/pictures/4059_-_wired_PSU.JPG" width="300" alt="Finished!">
C64 PSU Combi in a Hammond 1411P case

<img src="https://github.com/svenpetersen1965/C64-PSU-Combi/blob/master/Rev.%200/pictures/2512_-_finished_PSU.JPG" width="300" alt="Finished!">
C64 PSU Combi in a Teko 384 case
