EEPROM structure specific to FT2232H devices. Inherits from FT_EEPROM_DATA. More...
Public Attributes | |
| bool | PullDownEnable = false |
| Determines if IOs are pulled down when the device is in suspend More... | |
| bool | SerNumEnable = true |
| Determines if the serial number is enabled More... | |
| bool | ALSlowSlew = false |
| Determines if AL pins have a slow slew rate More... | |
| bool | ALSchmittInput = false |
| Determines if the AL pins have a Schmitt input More... | |
| byte | ALDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
| Determines the AL pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA More... | |
| bool | AHSlowSlew = false |
| Determines if AH pins have a slow slew rate More... | |
| bool | AHSchmittInput = false |
| Determines if the AH pins have a Schmitt input More... | |
| byte | AHDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
| Determines the AH pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA More... | |
| bool | BLSlowSlew = false |
| Determines if BL pins have a slow slew rate More... | |
| bool | BLSchmittInput = false |
| Determines if the BL pins have a Schmitt input More... | |
| byte | BLDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
| Determines the BL pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA More... | |
| bool | BHSlowSlew = false |
| Determines if BH pins have a slow slew rate More... | |
| bool | BHSchmittInput = false |
| Determines if the BH pins have a Schmitt input More... | |
| byte | BHDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
| Determines the BH pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA More... | |
| bool | IFAIsFifo = false |
| Determines if channel A is in FIFO mode More... | |
| bool | IFAIsFifoTar = false |
| Determines if channel A is in FIFO target mode More... | |
| bool | IFAIsFastSer = false |
| Determines if channel A is in fast serial mode More... | |
| bool | AIsVCP = true |
| Determines if channel A loads the VCP driver More... | |
| bool | IFBIsFifo = false |
| Determines if channel B is in FIFO mode More... | |
| bool | IFBIsFifoTar = false |
| Determines if channel B is in FIFO target mode More... | |
| bool | IFBIsFastSer = false |
| Determines if channel B is in fast serial mode More... | |
| bool | BIsVCP = true |
| Determines if channel B loads the VCP driver More... | |
| bool | PowerSaveEnable = false |
| For self-powered designs, keeps the FT2232H in low power state until BCBUS7 is high More... | |
 Public Attributes inherited from FTD2XX_NET.FTDI.FT_EEPROM_DATA | |
| UInt16 | VendorID = 0x0403 |
| Vendor ID as supplied by the USB Implementers Forum More... | |
| UInt16 | ProductID = 0x6001 |
| Product ID More... | |
| string | Manufacturer = "FTDI" |
| Manufacturer name string More... | |
| string | ManufacturerID = "FT" |
| Manufacturer name abbreviation to be used as a prefix for automatically generated serial numbers More... | |
| string | Description = "USB-Serial Converter" |
| Device description string More... | |
| string | SerialNumber = "" |
| Device serial number string More... | |
| UInt16 | MaxPower = 0x0090 |
| Maximum power the device needs More... | |
| bool | SelfPowered = false |
| Indicates if the device has its own power supply (self-powered) or gets power from the USB port (bus-powered) More... | |
| bool | RemoteWakeup = false |
| Determines if the device can wake the host PC from suspend by toggling the RI line More... | |
Detailed Description
EEPROM structure specific to FT2232H devices. Inherits from FT_EEPROM_DATA.
Member Data Documentation
◆ AHDriveCurrent
| byte FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.AHDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
Determines the AH pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA
◆ AHSchmittInput
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.AHSchmittInput = false |
Determines if the AH pins have a Schmitt input
◆ AHSlowSlew
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.AHSlowSlew = false |
Determines if AH pins have a slow slew rate
◆ AIsVCP
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.AIsVCP = true |
Determines if channel A loads the VCP driver
◆ ALDriveCurrent
| byte FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.ALDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
Determines the AL pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA
◆ ALSchmittInput
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.ALSchmittInput = false |
Determines if the AL pins have a Schmitt input
◆ ALSlowSlew
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.ALSlowSlew = false |
Determines if AL pins have a slow slew rate
◆ BHDriveCurrent
| byte FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.BHDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
Determines the BH pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA
◆ BHSchmittInput
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.BHSchmittInput = false |
Determines if the BH pins have a Schmitt input
◆ BHSlowSlew
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.BHSlowSlew = false |
Determines if BH pins have a slow slew rate
◆ BIsVCP
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.BIsVCP = true |
Determines if channel B loads the VCP driver
◆ BLDriveCurrent
| byte FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.BLDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
Determines the BL pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA
◆ BLSchmittInput
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.BLSchmittInput = false |
Determines if the BL pins have a Schmitt input
◆ BLSlowSlew
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.BLSlowSlew = false |
Determines if BL pins have a slow slew rate
◆ IFAIsFastSer
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.IFAIsFastSer = false |
Determines if channel A is in fast serial mode
◆ IFAIsFifo
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.IFAIsFifo = false |
Determines if channel A is in FIFO mode
◆ IFAIsFifoTar
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.IFAIsFifoTar = false |
Determines if channel A is in FIFO target mode
◆ IFBIsFastSer
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.IFBIsFastSer = false |
Determines if channel B is in fast serial mode
◆ IFBIsFifo
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.IFBIsFifo = false |
Determines if channel B is in FIFO mode
◆ IFBIsFifoTar
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.IFBIsFifoTar = false |
Determines if channel B is in FIFO target mode
◆ PowerSaveEnable
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.PowerSaveEnable = false |
For self-powered designs, keeps the FT2232H in low power state until BCBUS7 is high
◆ PullDownEnable
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.PullDownEnable = false |
Determines if IOs are pulled down when the device is in suspend
◆ SerNumEnable
| bool FTD2XX_NET.FTDI.FT2232H_EEPROM_STRUCTURE.SerNumEnable = true |
Determines if the serial number is enabled
The documentation for this class was generated from the following file:
- C:/PROJECTS/C#/BSL430.NET/src/BSL430.NET/FTD2XX_NET.cs
