Class wrapper for FTD2XX.DLL More...

Classes
class	FT2232_EEPROM_STRUCTURE
	EEPROM structure specific to FT2232 devices. Inherits from FT_EEPROM_DATA. More...

class	FT2232H_EEPROM_STRUCTURE
	EEPROM structure specific to FT2232H devices. Inherits from FT_EEPROM_DATA. More...

class	FT232B_EEPROM_STRUCTURE
	EEPROM structure specific to FT232B and FT245B devices. Inherits from FT_EEPROM_DATA. More...

class	FT232H_EEPROM_STRUCTURE
	EEPROM structure specific to FT232H devices. Inherits from FT_EEPROM_DATA. More...

class	FT232R_EEPROM_STRUCTURE
	EEPROM structure specific to FT232R and FT245R devices. Inherits from FT_EEPROM_DATA. More...

class	FT4232H_EEPROM_STRUCTURE
	EEPROM structure specific to FT4232H devices. Inherits from FT_EEPROM_DATA. More...

class	FT_232H_CBUS_OPTIONS
	Available functions for the FT232H CBUS pins. Controlled by FT232H EEPROM settings More...

class	FT_BIT_MODES
	Permitted bit mode values for FTDI devices. For use with SetBitMode More...

class	FT_CBUS_OPTIONS
	Available functions for the FT232R CBUS pins. Controlled by FT232R EEPROM settings More...

class	FT_DATA_BITS
	Permitted data bits for FTDI devices More...

class	FT_DEVICE_INFO_NODE
	Type that holds device information for GetDeviceInformation method. Used with FT_GetDeviceInfo and FT_GetDeviceInfoDetail in FTD2XX.DLL More...

class	FT_DRIVE_CURRENT
	Valid values for drive current options on FT2232H, FT4232H and FT232H devices. More...

class	FT_EEPROM_DATA
	Common EEPROM elements for all devices. Inherited to specific device type EEPROMs. More...

class	FT_EVENTS
	FTDI device event types that can be monitored More...

class	FT_EXCEPTION
	Exceptions thrown by errors within the FTDI class. More...

class	FT_FLAGS
	Flags that provide information on the FTDI device state More...

class	FT_FLOW_CONTROL
	Permitted flow control values for FTDI devices More...

class	FT_LINE_STATUS
	Line status bit definitions More...

class	FT_MODEM_STATUS
	Modem status bit definitions More...

class	FT_PARITY
	Permitted parity values for FTDI devices More...

class	FT_PURGE
	Purge buffer constant definitions More...

class	FT_STOP_BITS
	Permitted stop bits for FTDI devices More...

class	FT_XSERIES_CBUS_OPTIONS
	Available functions for the X-Series CBUS pins. Controlled by X-Series EEPROM settings More...

class	FT_XSERIES_EEPROM_STRUCTURE
	EEPROM structure specific to X-Series devices. Inherits from FT_EEPROM_DATA. More...

Public Types
enum	FT_STATUS { FT_STATUS.FT_OK = 0, FT_STATUS.FT_INVALID_HANDLE, FT_STATUS.FT_DEVICE_NOT_FOUND, FT_STATUS.FT_DEVICE_NOT_OPENED, FT_STATUS.FT_IO_ERROR, FT_STATUS.FT_INSUFFICIENT_RESOURCES, FT_STATUS.FT_INVALID_PARAMETER, FT_STATUS.FT_INVALID_BAUD_RATE, FT_STATUS.FT_DEVICE_NOT_OPENED_FOR_ERASE, FT_STATUS.FT_DEVICE_NOT_OPENED_FOR_WRITE, FT_STATUS.FT_FAILED_TO_WRITE_DEVICE, FT_STATUS.FT_EEPROM_READ_FAILED, FT_STATUS.FT_EEPROM_WRITE_FAILED, FT_STATUS.FT_EEPROM_ERASE_FAILED, FT_STATUS.FT_EEPROM_NOT_PRESENT, FT_STATUS.FT_EEPROM_NOT_PROGRAMMED, FT_STATUS.FT_INVALID_ARGS, FT_STATUS.FT_OTHER_ERROR }
	Status values for FTDI devices. More...

enum	FT_DEVICE { FT_DEVICE.FT_DEVICE_BM = 0, FT_DEVICE.FT_DEVICE_AM, FT_DEVICE.FT_DEVICE_100AX, FT_DEVICE.FT_DEVICE_UNKNOWN, FT_DEVICE.FT_DEVICE_2232, FT_DEVICE.FT_DEVICE_232R, FT_DEVICE.FT_DEVICE_2232H, FT_DEVICE.FT_DEVICE_4232H, FT_DEVICE.FT_DEVICE_232H, FT_DEVICE.FT_DEVICE_X_SERIES, FT_DEVICE.FT_DEVICE_4222H_0, FT_DEVICE.FT_DEVICE_4222H_1_2, FT_DEVICE.FT_DEVICE_4222H_3, FT_DEVICE.FT_DEVICE_4222_PROG }
	List of FTDI device types More...

Public Member Functions
	FTDI ()
	Constructor for the FTDI class. More...

	FTDI (String path)
	Non default constructor allowing passing of string for dll handle. More...

FT_STATUS	GetNumberOfDevices (ref UInt32 devcount)
	Gets the number of FTDI devices available. More...

FT_STATUS	GetDeviceList (FT_DEVICE_INFO_NODE[] devicelist)
	Gets information on all of the FTDI devices available. More...

FT_STATUS	OpenByIndex (UInt32 index)
	Opens the FTDI device with the specified index. More...

FT_STATUS	OpenBySerialNumber (string serialnumber)
	Opens the FTDI device with the specified serial number. More...

FT_STATUS	OpenByDescription (string description)
	Opens the FTDI device with the specified description. More...

FT_STATUS	OpenByLocation (UInt32 location)
	Opens the FTDI device at the specified physical location. More...

FT_STATUS	Close ()
	Closes the handle to an open FTDI device. More...

FT_STATUS	Read (byte[] dataBuffer, UInt32 numBytesToRead, ref UInt32 numBytesRead)
	Read data from an open FTDI device. More...

FT_STATUS	Read (out string dataBuffer, UInt32 numBytesToRead, ref UInt32 numBytesRead)
	Read data from an open FTDI device. More...

FT_STATUS	Write (byte[] dataBuffer, Int32 numBytesToWrite, ref UInt32 numBytesWritten)
	Write data to an open FTDI device. More...

FT_STATUS	Write (byte[] dataBuffer, UInt32 numBytesToWrite, ref UInt32 numBytesWritten)
	Write data to an open FTDI device. More...

FT_STATUS	Write (string dataBuffer, Int32 numBytesToWrite, ref UInt32 numBytesWritten)
	Write data to an open FTDI device. More...

FT_STATUS	Write (string dataBuffer, UInt32 numBytesToWrite, ref UInt32 numBytesWritten)
	Write data to an open FTDI device. More...

FT_STATUS	ResetDevice ()
	Reset an open FTDI device. More...

FT_STATUS	Purge (UInt32 purgemask)
	Purge data from the devices transmit and/or receive buffers. More...

FT_STATUS	SetEventNotification (UInt32 eventmask, EventWaitHandle eventhandle)
	Register for event notification. More...

FT_STATUS	StopInTask ()
	Stops the driver issuing USB in requests. More...

FT_STATUS	RestartInTask ()
	Resumes the driver issuing USB in requests. More...

FT_STATUS	ResetPort ()
	Resets the device port. More...

FT_STATUS	CyclePort ()
	Causes the device to be re-enumerated on the USB bus. This is equivalent to unplugging and replugging the device. Also calls FT_Close if FT_CyclePort is successful, so no need to call this separately in the application. More...

FT_STATUS	Rescan ()
	Causes the system to check for USB hardware changes. This is equivalent to clicking on the "Scan for hardware changes" button in the Device Manager. More...

FT_STATUS	Reload (UInt16 VendorID, UInt16 ProductID)
	Forces a reload of the driver for devices with a specific VID and PID combination. More...

FT_STATUS	SetBitMode (byte Mask, byte BitMode)
	Puts the device in a mode other than the default UART or FIFO mode. More...

FT_STATUS	GetPinStates (ref byte BitMode)
	Gets the instantaneous state of the device IO pins. More...

FT_STATUS	ReadEEPROMLocation (UInt32 Address, ref UInt16 EEValue)
	Reads an individual word value from a specified location in the device's EEPROM. More...

FT_STATUS	WriteEEPROMLocation (UInt32 Address, UInt16 EEValue)
	Writes an individual word value to a specified location in the device's EEPROM. More...

FT_STATUS	EraseEEPROM ()
	Erases the device EEPROM. More...

FT_STATUS	ReadFT232BEEPROM (FT232B_EEPROM_STRUCTURE ee232b)
	Reads the EEPROM contents of an FT232B or FT245B device. More...

FT_STATUS	ReadFT2232EEPROM (FT2232_EEPROM_STRUCTURE ee2232)
	Reads the EEPROM contents of an FT2232 device. More...

FT_STATUS	ReadFT232REEPROM (FT232R_EEPROM_STRUCTURE ee232r)
	Reads the EEPROM contents of an FT232R or FT245R device. Calls FT_EE_Read in FTD2XX DLL More...

FT_STATUS	ReadFT2232HEEPROM (FT2232H_EEPROM_STRUCTURE ee2232h)
	Reads the EEPROM contents of an FT2232H device. More...

FT_STATUS	ReadFT4232HEEPROM (FT4232H_EEPROM_STRUCTURE ee4232h)
	Reads the EEPROM contents of an FT4232H device. More...

FT_STATUS	ReadFT232HEEPROM (FT232H_EEPROM_STRUCTURE ee232h)
	Reads the EEPROM contents of an FT232H device. More...

FT_STATUS	ReadXSeriesEEPROM (FT_XSERIES_EEPROM_STRUCTURE eeX)
	Reads the EEPROM contents of an X-Series device. More...

FT_STATUS	WriteFT232BEEPROM (FT232B_EEPROM_STRUCTURE ee232b)
	Writes the specified values to the EEPROM of an FT232B or FT245B device. More...

FT_STATUS	WriteFT2232EEPROM (FT2232_EEPROM_STRUCTURE ee2232)
	Writes the specified values to the EEPROM of an FT2232 device. Calls FT_EE_Program in FTD2XX DLL More...

FT_STATUS	WriteFT232REEPROM (FT232R_EEPROM_STRUCTURE ee232r)
	Writes the specified values to the EEPROM of an FT232R or FT245R device. Calls FT_EE_Program in FTD2XX DLL More...

FT_STATUS	WriteFT2232HEEPROM (FT2232H_EEPROM_STRUCTURE ee2232h)
	Writes the specified values to the EEPROM of an FT2232H device. Calls FT_EE_Program in FTD2XX DLL More...

FT_STATUS	WriteFT4232HEEPROM (FT4232H_EEPROM_STRUCTURE ee4232h)
	Writes the specified values to the EEPROM of an FT4232H device. Calls FT_EE_Program in FTD2XX DLL More...

FT_STATUS	WriteFT232HEEPROM (FT232H_EEPROM_STRUCTURE ee232h)
	Writes the specified values to the EEPROM of an FT232H device. Calls FT_EE_Program in FTD2XX DLL More...

FT_STATUS	WriteXSeriesEEPROM (FT_XSERIES_EEPROM_STRUCTURE eeX)
	Writes the specified values to the EEPROM of an X-Series device. Calls FT_EEPROM_Program in FTD2XX DLL More...

FT_STATUS	EEReadUserArea (byte[] UserAreaDataBuffer, ref UInt32 numBytesRead)
	Reads data from the user area of the device EEPROM. More...

FT_STATUS	EEWriteUserArea (byte[] UserAreaDataBuffer)
	Writes data to the user area of the device EEPROM. More...

FT_STATUS	GetDeviceType (ref FT_DEVICE DeviceType)
	Gets the chip type of the current device. More...

FT_STATUS	GetDeviceID (ref UInt32 DeviceID)
	Gets the Vendor ID and Product ID of the current device. More...

FT_STATUS	GetDescription (out string Description)
	Gets the description of the current device. More...

FT_STATUS	GetSerialNumber (out string SerialNumber)
	Gets the serial number of the current device. More...

FT_STATUS	GetRxBytesAvailable (ref UInt32 RxQueue)
	Gets the number of bytes available in the receive buffer. More...

FT_STATUS	GetTxBytesWaiting (ref UInt32 TxQueue)
	Gets the number of bytes waiting in the transmit buffer. More...

FT_STATUS	GetEventType (ref UInt32 EventType)
	Gets the event type after an event has fired. Can be used to distinguish which event has been triggered when waiting on multiple event types. More...

FT_STATUS	GetModemStatus (ref byte ModemStatus)
	Gets the current modem status. More...

FT_STATUS	GetLineStatus (ref byte LineStatus)
	Gets the current line status. More...

FT_STATUS	SetBaudRate (UInt32 BaudRate)
	Sets the current Baud rate. More...

FT_STATUS	SetDataCharacteristics (byte DataBits, byte StopBits, byte Parity)
	Sets the data bits, stop bits and parity for the device. More...

FT_STATUS	SetFlowControl (UInt16 FlowControl, byte Xon, byte Xoff)
	Sets the flow control type. More...

FT_STATUS	SetRTS (bool Enable)
	Asserts or de-asserts the Request To Send (RTS) line. More...

FT_STATUS	SetDTR (bool Enable)
	Asserts or de-asserts the Data Terminal Ready (DTR) line. More...

FT_STATUS	SetTimeouts (UInt32 ReadTimeout, UInt32 WriteTimeout)
	Sets the read and write timeout values. More...

FT_STATUS	SetBreak (bool Enable)
	Sets or clears the break state. More...

FT_STATUS	SetResetPipeRetryCount (UInt32 ResetPipeRetryCount)
	Gets or sets the reset pipe retry count. Default value is 50. More...

FT_STATUS	GetDriverVersion (ref UInt32 DriverVersion)
	Gets the current FTDIBUS.SYS driver version number. More...

FT_STATUS	GetLibraryVersion (ref UInt32 LibraryVersion)
	Gets the current FTD2XX.DLL driver version number. More...

FT_STATUS	SetDeadmanTimeout (UInt32 DeadmanTimeout)
	Sets the USB deadman timeout value. Default is 5000ms. More...

FT_STATUS	SetLatency (byte Latency)
	Sets the value of the latency timer. Default value is 16ms. More...

FT_STATUS	GetLatency (ref byte Latency)
	Gets the value of the latency timer. Default value is 16ms. More...

FT_STATUS	InTransferSize (UInt32 InTransferSize)
	Sets the USB IN and OUT transfer sizes. More...

FT_STATUS	SetCharacters (byte EventChar, bool EventCharEnable, byte ErrorChar, bool ErrorCharEnable)
	Sets an event character, an error character and enables or disables them. More...

FT_STATUS	EEUserAreaSize (ref UInt32 UASize)
	Gets the size of the EEPROM user area. More...

FT_STATUS	GetCOMPort (out string ComPortName)
	Gets the corresponding COM port number for the current device. If no COM port is exposed, an empty string is returned. More...

FT_STATUS	VendorCmdGet (UInt16 request, byte[] buf, UInt16 len)
	Get data from the FT4222 using the vendor command interface. More...

FT_STATUS	VendorCmdSet (UInt16 request, byte[] buf, UInt16 len)
	Set data from the FT4222 using the vendor command interface. More...

Properties
bool	IsOpen `[get]`
	Gets the open status of the device. More...

Detailed Description

Class wrapper for FTD2XX.DLL

Member Enumeration Documentation

◆ FT_DEVICE

enum FTD2XX_NET.FTDI.FT_DEVICE

strong

List of FTDI device types

Enumerator
FT_DEVICE_BM	FT232B or FT245B device
FT_DEVICE_AM	FT8U232AM or FT8U245AM device
FT_DEVICE_100AX	FT8U100AX device
FT_DEVICE_UNKNOWN	Unknown device
FT_DEVICE_2232	FT2232 device
FT_DEVICE_232R	FT232R or FT245R device
FT_DEVICE_2232H	FT2232H device
FT_DEVICE_4232H	FT4232H device
FT_DEVICE_232H	FT232H device
FT_DEVICE_X_SERIES	FT X-Series device
FT_DEVICE_4222H_0	FT4222 hi-speed device Mode 0 - 2 interfaces
FT_DEVICE_4222H_1_2	FT4222 hi-speed device Mode 1 or 2 - 4 interfaces
FT_DEVICE_4222H_3	FT4222 hi-speed device Mode 3 - 1 interface
FT_DEVICE_4222_PROG	OTP programmer board for the FT4222.

◆ FT_STATUS

enum FTD2XX_NET.FTDI.FT_STATUS

strong

Status values for FTDI devices.

Enumerator
FT_OK	Status OK
FT_INVALID_HANDLE	The device handle is invalid
FT_DEVICE_NOT_FOUND	Device not found
FT_DEVICE_NOT_OPENED	Device is not open
FT_IO_ERROR	IO error
FT_INSUFFICIENT_RESOURCES	Insufficient resources
FT_INVALID_PARAMETER	A parameter was invalid
FT_INVALID_BAUD_RATE	The requested baud rate is invalid
FT_DEVICE_NOT_OPENED_FOR_ERASE	Device not opened for erase
FT_DEVICE_NOT_OPENED_FOR_WRITE	Device not poened for write
FT_FAILED_TO_WRITE_DEVICE	Failed to write to device
FT_EEPROM_READ_FAILED	Failed to read the device EEPROM
FT_EEPROM_WRITE_FAILED	Failed to write the device EEPROM
FT_EEPROM_ERASE_FAILED	Failed to erase the device EEPROM
FT_EEPROM_NOT_PRESENT	An EEPROM is not fitted to the device
FT_EEPROM_NOT_PROGRAMMED	Device EEPROM is blank
FT_INVALID_ARGS	Invalid arguments
FT_OTHER_ERROR	An other error has occurred

Constructor & Destructor Documentation

◆ FTDI() [1/2]

FTD2XX_NET.FTDI.FTDI ( )

Constructor for the FTDI class.

◆ FTDI() [2/2]

FTD2XX_NET.FTDI.FTDI ( String path )

Non default constructor allowing passing of string for dll handle.

Member Function Documentation

◆ Close()

FT_STATUS FTD2XX_NET.FTDI.Close ( )

Closes the handle to an open FTDI device.

Returns: FT_STATUS value from FT_Close in FTD2XX.DLL

◆ CyclePort()

FT_STATUS FTD2XX_NET.FTDI.CyclePort ( )

Causes the device to be re-enumerated on the USB bus. This is equivalent to unplugging and replugging the device. Also calls FT_Close if FT_CyclePort is successful, so no need to call this separately in the application.

Returns: FT_STATUS value from FT_CyclePort in FTD2XX.DLL

◆ EEReadUserArea()

FT_STATUS FTD2XX_NET.FTDI.EEReadUserArea	(	byte []	UserAreaDataBuffer,
		ref UInt32	numBytesRead
	)

Reads data from the user area of the device EEPROM.

Returns: FT_STATUS from FT_UARead in FTD2XX.DLL

Parameters

UserAreaDataBuffer	An array of bytes which will be populated with the data read from the device EEPROM user area.
numBytesRead	The number of bytes actually read from the EEPROM user area.

◆ EEUserAreaSize()

FT_STATUS FTD2XX_NET.FTDI.EEUserAreaSize ( ref UInt32 UASize )

Gets the size of the EEPROM user area.

Returns: FT_STATUS value from FT_EE_UASize in FTD2XX.DLL

Parameters

UASize The EEPROM user area size in bytes.

◆ EEWriteUserArea()

FT_STATUS FTD2XX_NET.FTDI.EEWriteUserArea ( byte [] UserAreaDataBuffer )

Writes data to the user area of the device EEPROM.

Returns: FT_STATUS value from FT_UAWrite in FTD2XX.DLL

Parameters

UserAreaDataBuffer An array of bytes which will be written to the device EEPROM user area.

◆ EraseEEPROM()

FT_STATUS FTD2XX_NET.FTDI.EraseEEPROM ( )

Erases the device EEPROM.

Returns: FT_STATUS value from FT_EraseEE in FTD2XX.DLL

Exceptions

FT_EXCEPTION Thrown when attempting to erase the EEPROM of a device with an internal EEPROM such as an FT232R or FT245R.

◆ GetCOMPort()

FT_STATUS FTD2XX_NET.FTDI.GetCOMPort ( out string ComPortName )

Gets the corresponding COM port number for the current device. If no COM port is exposed, an empty string is returned.

Returns: FT_STATUS value from FT_GetComPortNumber in FTD2XX.DLL

Parameters

ComPortName The COM port name corresponding to the current device. If no COM port is installed, an empty string is passed back.

◆ GetDescription()

FT_STATUS FTD2XX_NET.FTDI.GetDescription ( out string Description )

Gets the description of the current device.

Returns: FT_STATUS value from FT_GetDeviceInfo in FTD2XX.DLL

Parameters

Description The description of the current device.

◆ GetDeviceID()

FT_STATUS FTD2XX_NET.FTDI.GetDeviceID ( ref UInt32 DeviceID )

Gets the Vendor ID and Product ID of the current device.

Returns: FT_STATUS value from FT_GetDeviceInfo in FTD2XX.DLL

Parameters

DeviceID The device ID (Vendor ID and Product ID) of the current device.

◆ GetDeviceList()

FT_STATUS FTD2XX_NET.FTDI.GetDeviceList ( FT_DEVICE_INFO_NODE [] devicelist )

Gets information on all of the FTDI devices available.

Returns: FT_STATUS value from FT_GetDeviceInfoDetail in FTD2XX.DLL

Parameters

devicelist An array of type FT_DEVICE_INFO_NODE to contain the device information for all available devices.

Exceptions

FT_EXCEPTION Thrown when the supplied buffer is not large enough to contain the device info list.

◆ GetDeviceType()

FT_STATUS FTD2XX_NET.FTDI.GetDeviceType ( ref FT_DEVICE DeviceType )

Gets the chip type of the current device.

Returns: FT_STATUS value from FT_GetDeviceInfo in FTD2XX.DLL

Parameters

DeviceType The FTDI chip type of the current device.

◆ GetDriverVersion()

FT_STATUS FTD2XX_NET.FTDI.GetDriverVersion ( ref UInt32 DriverVersion )

Gets the current FTDIBUS.SYS driver version number.

Returns: FT_STATUS value from FT_GetDriverVersion in FTD2XX.DLL

Parameters

DriverVersion The current driver version number.

◆ GetEventType()

FT_STATUS FTD2XX_NET.FTDI.GetEventType ( ref UInt32 EventType )

Gets the event type after an event has fired. Can be used to distinguish which event has been triggered when waiting on multiple event types.

Returns: FT_STATUS value from FT_GetStatus in FTD2XX.DLL

Parameters

EventType The type of event that has occurred.

◆ GetLatency()

FT_STATUS FTD2XX_NET.FTDI.GetLatency ( ref byte Latency )

Gets the value of the latency timer. Default value is 16ms.

Returns: FT_STATUS value from FT_GetLatencyTimer in FTD2XX.DLL

Parameters

Latency The latency timer value in ms.

◆ GetLibraryVersion()

FT_STATUS FTD2XX_NET.FTDI.GetLibraryVersion ( ref UInt32 LibraryVersion )

Gets the current FTD2XX.DLL driver version number.

Returns: FT_STATUS value from FT_GetLibraryVersion in FTD2XX.DLL

Parameters

LibraryVersion The current library version.

◆ GetLineStatus()

FT_STATUS FTD2XX_NET.FTDI.GetLineStatus ( ref byte LineStatus )

Gets the current line status.

Returns: FT_STATUS value from FT_GetModemStatus in FTD2XX.DLL

Parameters

LineStatus A bit map representaion of the current line status.

◆ GetModemStatus()

FT_STATUS FTD2XX_NET.FTDI.GetModemStatus ( ref byte ModemStatus )

Gets the current modem status.

Returns: FT_STATUS value from FT_GetModemStatus in FTD2XX.DLL

Parameters

ModemStatus A bit map representaion of the current modem status.

◆ GetNumberOfDevices()

FT_STATUS FTD2XX_NET.FTDI.GetNumberOfDevices ( ref UInt32 devcount )

Gets the number of FTDI devices available.

Returns: FT_STATUS value from FT_CreateDeviceInfoList in FTD2XX.DLL

Parameters

devcount The number of FTDI devices available.

◆ GetPinStates()

FT_STATUS FTD2XX_NET.FTDI.GetPinStates ( ref byte BitMode )

Gets the instantaneous state of the device IO pins.

Returns: FT_STATUS value from FT_GetBitMode in FTD2XX.DLL

Parameters

BitMode A bitmap value containing the instantaneous state of the device IO pins

◆ GetRxBytesAvailable()

FT_STATUS FTD2XX_NET.FTDI.GetRxBytesAvailable ( ref UInt32 RxQueue )

Gets the number of bytes available in the receive buffer.

Returns: FT_STATUS value from FT_GetQueueStatus in FTD2XX.DLL

Parameters

RxQueue The number of bytes available to be read.

◆ GetSerialNumber()

FT_STATUS FTD2XX_NET.FTDI.GetSerialNumber ( out string SerialNumber )

Gets the serial number of the current device.

Returns: FT_STATUS value from FT_GetDeviceInfo in FTD2XX.DLL

Parameters

SerialNumber The serial number of the current device.

◆ GetTxBytesWaiting()

FT_STATUS FTD2XX_NET.FTDI.GetTxBytesWaiting ( ref UInt32 TxQueue )

Gets the number of bytes waiting in the transmit buffer.

Returns: FT_STATUS value from FT_GetStatus in FTD2XX.DLL

Parameters

TxQueue The number of bytes waiting to be sent.

◆ InTransferSize()

FT_STATUS FTD2XX_NET.FTDI.InTransferSize ( UInt32 InTransferSize )

Sets the USB IN and OUT transfer sizes.

Returns: FT_STATUS value from FT_SetUSBParameters in FTD2XX.DLL

Parameters

InTransferSize The USB IN transfer size in bytes.

◆ OpenByDescription()

FT_STATUS FTD2XX_NET.FTDI.OpenByDescription ( string description )

Opens the FTDI device with the specified description.

Returns: FT_STATUS value from FT_OpenEx in FTD2XX.DLL

Parameters

description Description of the device to open.

Initialises the device to 8 data bits, 1 stop bit, no parity, no flow control and 9600 Baud.

◆ OpenByIndex()

FT_STATUS FTD2XX_NET.FTDI.OpenByIndex ( UInt32 index )

Opens the FTDI device with the specified index.

Returns: FT_STATUS value from FT_Open in FTD2XX.DLL

Parameters

index Index of the device to open. Note that this cannot be guaranteed to open a specific device.

Initialises the device to 8 data bits, 1 stop bit, no parity, no flow control and 9600 Baud.

◆ OpenByLocation()

FT_STATUS FTD2XX_NET.FTDI.OpenByLocation ( UInt32 location )

Opens the FTDI device at the specified physical location.

Returns: FT_STATUS value from FT_OpenEx in FTD2XX.DLL

Parameters

location Location of the device to open.

Initialises the device to 8 data bits, 1 stop bit, no parity, no flow control and 9600 Baud.

◆ OpenBySerialNumber()

FT_STATUS FTD2XX_NET.FTDI.OpenBySerialNumber ( string serialnumber )

Opens the FTDI device with the specified serial number.

Returns: FT_STATUS value from FT_OpenEx in FTD2XX.DLL

Parameters

serialnumber Serial number of the device to open.

Initialises the device to 8 data bits, 1 stop bit, no parity, no flow control and 9600 Baud.

◆ Purge()

FT_STATUS FTD2XX_NET.FTDI.Purge ( UInt32 purgemask )

Purge data from the devices transmit and/or receive buffers.

Returns: FT_STATUS value from FT_Purge in FTD2XX.DLL

Parameters

purgemask Specifies which buffer(s) to be purged. Valid values are any combination of the following flags: FT_PURGE_RX, FT_PURGE_TX

◆ Read() [1/2]

FT_STATUS FTD2XX_NET.FTDI.Read	(	byte []	dataBuffer,
		UInt32	numBytesToRead,
		ref UInt32	numBytesRead
	)

Read data from an open FTDI device.

Returns: FT_STATUS value from FT_Read in FTD2XX.DLL

Parameters

dataBuffer	An array of bytes which will be populated with the data read from the device.
numBytesToRead	The number of bytes requested from the device.
numBytesRead	The number of bytes actually read.

◆ Read() [2/2]

FT_STATUS FTD2XX_NET.FTDI.Read	(	out string	dataBuffer,
		UInt32	numBytesToRead,
		ref UInt32	numBytesRead
	)

Read data from an open FTDI device.

Returns: FT_STATUS value from FT_Read in FTD2XX.DLL

Parameters

dataBuffer	A string containing the data read
numBytesToRead	The number of bytes requested from the device.
numBytesRead	The number of bytes actually read.

◆ ReadEEPROMLocation()

FT_STATUS FTD2XX_NET.FTDI.ReadEEPROMLocation	(	UInt32	Address,
		ref UInt16	EEValue
	)

Reads an individual word value from a specified location in the device's EEPROM.

Returns: FT_STATUS value from FT_ReadEE in FTD2XX.DLL

Parameters

Address	The EEPROM location to read data from
EEValue	The WORD value read from the EEPROM location specified in the Address paramter

◆ ReadFT2232EEPROM()

FT_STATUS FTD2XX_NET.FTDI.ReadFT2232EEPROM ( FT2232_EEPROM_STRUCTURE ee2232 )

Reads the EEPROM contents of an FT2232 device.

Returns: FT_STATUS value from FT_EE_Read in FTD2XX DLL

Parameters

ee2232 An FT2232_EEPROM_STRUCTURE which contains only the relevant information for an FT2232 device.

Exceptions

FT_EXCEPTION Thrown when the current device does not match the type required by this method.

◆ ReadFT2232HEEPROM()

FT_STATUS FTD2XX_NET.FTDI.ReadFT2232HEEPROM ( FT2232H_EEPROM_STRUCTURE ee2232h )

Reads the EEPROM contents of an FT2232H device.

Returns: FT_STATUS value from FT_EE_Read in FTD2XX DLL

Parameters

ee2232h An FT2232H_EEPROM_STRUCTURE which contains only the relevant information for an FT2232H device.

Exceptions

FT_EXCEPTION Thrown when the current device does not match the type required by this method.

◆ ReadFT232BEEPROM()

FT_STATUS FTD2XX_NET.FTDI.ReadFT232BEEPROM ( FT232B_EEPROM_STRUCTURE ee232b )

Reads the EEPROM contents of an FT232B or FT245B device.

Returns: FT_STATUS value from FT_EE_Read in FTD2XX DLL

Parameters

ee232b An FT232B_EEPROM_STRUCTURE which contains only the relevant information for an FT232B and FT245B device.

Exceptions

FT_EXCEPTION Thrown when the current device does not match the type required by this method.

◆ ReadFT232HEEPROM()

FT_STATUS FTD2XX_NET.FTDI.ReadFT232HEEPROM ( FT232H_EEPROM_STRUCTURE ee232h )

Reads the EEPROM contents of an FT232H device.

Returns: FT_STATUS value from FT_EE_Read in FTD2XX DLL

Parameters

ee232h An FT232H_EEPROM_STRUCTURE which contains only the relevant information for an FT232H device.

Exceptions

FT_EXCEPTION Thrown when the current device does not match the type required by this method.

◆ ReadFT232REEPROM()

FT_STATUS FTD2XX_NET.FTDI.ReadFT232REEPROM ( FT232R_EEPROM_STRUCTURE ee232r )

Reads the EEPROM contents of an FT232R or FT245R device. Calls FT_EE_Read in FTD2XX DLL

Returns: An FT232R_EEPROM_STRUCTURE which contains only the relevant information for an FT232R and FT245R device.

Exceptions

FT_EXCEPTION Thrown when the current device does not match the type required by this method.

◆ ReadFT4232HEEPROM()

FT_STATUS FTD2XX_NET.FTDI.ReadFT4232HEEPROM ( FT4232H_EEPROM_STRUCTURE ee4232h )

Reads the EEPROM contents of an FT4232H device.

Returns: FT_STATUS value from FT_EE_Read in FTD2XX DLL

Parameters

ee4232h An FT4232H_EEPROM_STRUCTURE which contains only the relevant information for an FT4232H device.

Exceptions

FT_EXCEPTION Thrown when the current device does not match the type required by this method.

◆ ReadXSeriesEEPROM()

FT_STATUS FTD2XX_NET.FTDI.ReadXSeriesEEPROM ( FT_XSERIES_EEPROM_STRUCTURE eeX )

Reads the EEPROM contents of an X-Series device.

Returns: FT_STATUS value from FT_EEPROM_Read in FTD2XX DLL

Parameters

eeX	An FT_XSERIES_EEPROM_STRUCTURE which contains only the relevant information for an X-Series device.

Exceptions

FT_EXCEPTION Thrown when the current device does not match the type required by this method.

◆ Reload()

FT_STATUS FTD2XX_NET.FTDI.Reload	(	UInt16	VendorID,
		UInt16	ProductID
	)

Forces a reload of the driver for devices with a specific VID and PID combination.

Returns: FT_STATUS value from FT_Reload in FTD2XX.DLL

If the VID and PID parameters are 0, the drivers for USB root hubs will be reloaded, causing all USB devices connected to reload their drivers

Parameters

VendorID	Vendor ID of the devices to have the driver reloaded
ProductID	Product ID of the devices to have the driver reloaded

◆ Rescan()

FT_STATUS FTD2XX_NET.FTDI.Rescan ( )

Causes the system to check for USB hardware changes. This is equivalent to clicking on the "Scan for hardware changes" button in the Device Manager.

Returns: FT_STATUS value from FT_Rescan in FTD2XX.DLL

◆ ResetDevice()

FT_STATUS FTD2XX_NET.FTDI.ResetDevice ( )

Reset an open FTDI device.

Returns: FT_STATUS value from FT_ResetDevice in FTD2XX.DLL

◆ ResetPort()

FT_STATUS FTD2XX_NET.FTDI.ResetPort ( )

Resets the device port.

Returns: FT_STATUS value from FT_ResetPort in FTD2XX.DLL

◆ RestartInTask()

FT_STATUS FTD2XX_NET.FTDI.RestartInTask ( )

Resumes the driver issuing USB in requests.

Returns: FT_STATUS value from FT_RestartInTask in FTD2XX.DLL

◆ SetBaudRate()

FT_STATUS FTD2XX_NET.FTDI.SetBaudRate ( UInt32 BaudRate )

Sets the current Baud rate.

Returns: FT_STATUS value from FT_SetBaudRate in FTD2XX.DLL

Parameters

BaudRate The desired Baud rate for the device.

◆ SetBitMode()

FT_STATUS FTD2XX_NET.FTDI.SetBitMode	(	byte	Mask,
		byte	BitMode
	)

Puts the device in a mode other than the default UART or FIFO mode.

Returns: FT_STATUS value from FT_SetBitMode in FTD2XX.DLL

Parameters

Mask Sets up which bits are inputs and which are outputs. A bit value of 0 sets the corresponding pin to an input, a bit value of 1 sets the corresponding pin to an output. In the case of CBUS Bit Bang, the upper nibble of this value controls which pins are inputs and outputs, while the lower nibble controls which of the outputs are high and low.

BitMode For FT232H devices, valid values are FT_BIT_MODE_RESET, FT_BIT_MODE_ASYNC_BITBANG, FT_BIT_MODE_MPSSE, FT_BIT_MODE_SYNC_BITBANG, FT_BIT_MODE_CBUS_BITBANG, FT_BIT_MODE_MCU_HOST, FT_BIT_MODE_FAST_SERIAL, FT_BIT_MODE_SYNC_FIFO. For FT2232H devices, valid values are FT_BIT_MODE_RESET, FT_BIT_MODE_ASYNC_BITBANG, FT_BIT_MODE_MPSSE, FT_BIT_MODE_SYNC_BITBANG, FT_BIT_MODE_MCU_HOST, FT_BIT_MODE_FAST_SERIAL, FT_BIT_MODE_SYNC_FIFO. For FT4232H devices, valid values are FT_BIT_MODE_RESET, FT_BIT_MODE_ASYNC_BITBANG, FT_BIT_MODE_MPSSE, FT_BIT_MODE_SYNC_BITBANG. For FT232R devices, valid values are FT_BIT_MODE_RESET, FT_BIT_MODE_ASYNC_BITBANG, FT_BIT_MODE_SYNC_BITBANG, FT_BIT_MODE_CBUS_BITBANG. For FT245R devices, valid values are FT_BIT_MODE_RESET, FT_BIT_MODE_ASYNC_BITBANG, FT_BIT_MODE_SYNC_BITBANG. For FT2232 devices, valid values are FT_BIT_MODE_RESET, FT_BIT_MODE_ASYNC_BITBANG, FT_BIT_MODE_MPSSE, FT_BIT_MODE_SYNC_BITBANG, FT_BIT_MODE_MCU_HOST, FT_BIT_MODE_FAST_SERIAL. For FT232B and FT245B devices, valid values are FT_BIT_MODE_RESET, FT_BIT_MODE_ASYNC_BITBANG.

Exceptions

FT_EXCEPTION Thrown when the current device does not support the requested bit mode.

◆ SetBreak()

FT_STATUS FTD2XX_NET.FTDI.SetBreak ( bool Enable )

Sets or clears the break state.

Returns: FT_STATUS value from FT_SetBreakOn or FT_SetBreakOff in FTD2XX.DLL

Parameters

Enable If true, sets break on. If false, sets break off.

◆ SetCharacters()

FT_STATUS FTD2XX_NET.FTDI.SetCharacters	(	byte	EventChar,
		bool	EventCharEnable,
		byte	ErrorChar,
		bool	ErrorCharEnable
	)

Sets an event character, an error character and enables or disables them.

Returns: FT_STATUS value from FT_SetChars in FTD2XX.DLL

Parameters

EventChar	A character that will be tigger an IN to the host when this character is received.
EventCharEnable	Determines if the EventChar is enabled or disabled.
ErrorChar	A character that will be inserted into the data stream to indicate that an error has occurred.
ErrorCharEnable	Determines if the ErrorChar is enabled or disabled.

◆ SetDataCharacteristics()

FT_STATUS FTD2XX_NET.FTDI.SetDataCharacteristics	(	byte	DataBits,
		byte	StopBits,
		byte	Parity
	)

Sets the data bits, stop bits and parity for the device.

Returns: FT_STATUS value from FT_SetDataCharacteristics in FTD2XX.DLL

Parameters

DataBits	The number of data bits for UART data. Valid values are FT_DATA_BITS.FT_DATA_7 or FT_DATA_BITS.FT_BITS_8
StopBits	The number of stop bits for UART data. Valid values are FT_STOP_BITS.FT_STOP_BITS_1 or FT_STOP_BITS.FT_STOP_BITS_2
Parity	The parity of the UART data. Valid values are FT_PARITY.FT_PARITY_NONE, FT_PARITY.FT_PARITY_ODD, FT_PARITY.FT_PARITY_EVEN, FT_PARITY.FT_PARITY_MARK or FT_PARITY.FT_PARITY_SPACE

◆ SetDeadmanTimeout()

FT_STATUS FTD2XX_NET.FTDI.SetDeadmanTimeout ( UInt32 DeadmanTimeout )

Sets the USB deadman timeout value. Default is 5000ms.

Returns: FT_STATUS value from FT_SetDeadmanTimeout in FTD2XX.DLL

Parameters

DeadmanTimeout The deadman timeout value in ms. Default is 5000ms.

◆ SetDTR()

FT_STATUS FTD2XX_NET.FTDI.SetDTR ( bool Enable )

Asserts or de-asserts the Data Terminal Ready (DTR) line.

Returns: FT_STATUS value from FT_SetDtr or FT_ClrDtr in FTD2XX.DLL

Parameters

Enable If true, asserts DTR. If false, de-asserts DTR.

◆ SetEventNotification()

FT_STATUS FTD2XX_NET.FTDI.SetEventNotification	(	UInt32	eventmask,
		EventWaitHandle	eventhandle
	)

Register for event notification.

Returns: FT_STATUS value from FT_SetEventNotification in FTD2XX.DLL

After setting event notification, the event can be caught by executing the WaitOne() method of the EventWaitHandle. If multiple event types are being monitored, the event that fired can be determined from the GetEventType method.

Parameters

eventmask	The type of events to signal. Can be any combination of the following: FT_EVENT_RXCHAR, FT_EVENT_MODEM_STATUS, FT_EVENT_LINE_STATUS
eventhandle	Handle to the event that will receive the notification

◆ SetFlowControl()

FT_STATUS FTD2XX_NET.FTDI.SetFlowControl	(	UInt16	FlowControl,
		byte	Xon,
		byte	Xoff
	)

Sets the flow control type.

Returns: FT_STATUS value from FT_SetFlowControl in FTD2XX.DLL

Parameters

FlowControl	The type of flow control for the UART. Valid values are FT_FLOW_CONTROL.FT_FLOW_NONE, FT_FLOW_CONTROL.FT_FLOW_RTS_CTS, FT_FLOW_CONTROL.FT_FLOW_DTR_DSR or FT_FLOW_CONTROL.FT_FLOW_XON_XOFF
Xon	The Xon character for Xon/Xoff flow control. Ignored if not using Xon/XOff flow control.
Xoff	The Xoff character for Xon/Xoff flow control. Ignored if not using Xon/XOff flow control.

◆ SetLatency()

FT_STATUS FTD2XX_NET.FTDI.SetLatency ( byte Latency )

Sets the value of the latency timer. Default value is 16ms.

Returns: FT_STATUS value from FT_SetLatencyTimer in FTD2XX.DLL

Parameters

Latency The latency timer value in ms. Valid values are 2ms - 255ms for FT232BM, FT245BM and FT2232 devices. Valid values are 0ms - 255ms for other devices.

◆ SetResetPipeRetryCount()

FT_STATUS FTD2XX_NET.FTDI.SetResetPipeRetryCount ( UInt32 ResetPipeRetryCount )

Gets or sets the reset pipe retry count. Default value is 50.

Returns: FT_STATUS vlaue from FT_SetResetPipeRetryCount in FTD2XX.DLL

Parameters

ResetPipeRetryCount The reset pipe retry count.

Electrically noisy environments may benefit from a larger value.

◆ SetRTS()

FT_STATUS FTD2XX_NET.FTDI.SetRTS ( bool Enable )

Asserts or de-asserts the Request To Send (RTS) line.

Returns: FT_STATUS value from FT_SetRts or FT_ClrRts in FTD2XX.DLL

Parameters

Enable If true, asserts RTS. If false, de-asserts RTS

◆ SetTimeouts()

FT_STATUS FTD2XX_NET.FTDI.SetTimeouts	(	UInt32	ReadTimeout,
		UInt32	WriteTimeout
	)

Sets the read and write timeout values.

Returns: FT_STATUS value from FT_SetTimeouts in FTD2XX.DLL

Parameters

ReadTimeout	Read timeout value in ms. A value of 0 indicates an infinite timeout.
WriteTimeout	Write timeout value in ms. A value of 0 indicates an infinite timeout.

◆ StopInTask()

FT_STATUS FTD2XX_NET.FTDI.StopInTask ( )

Stops the driver issuing USB in requests.

Returns: FT_STATUS value from FT_StopInTask in FTD2XX.DLL

◆ VendorCmdGet()

FT_STATUS FTD2XX_NET.FTDI.VendorCmdGet	(	UInt16	request,
		byte []	buf,
		UInt16	len
	)

Get data from the FT4222 using the vendor command interface.

Returns: FT_STATUS value from FT_VendorCmdSet in FTD2XX.DLL

◆ VendorCmdSet()

FT_STATUS FTD2XX_NET.FTDI.VendorCmdSet	(	UInt16	request,
		byte []	buf,
		UInt16	len
	)

Set data from the FT4222 using the vendor command interface.

Returns: FT_STATUS value from FT_VendorCmdSet in FTD2XX.DLL

◆ Write() [1/4]

FT_STATUS FTD2XX_NET.FTDI.Write	(	byte []	dataBuffer,
		Int32	numBytesToWrite,
		ref UInt32	numBytesWritten
	)

Write data to an open FTDI device.

Returns: FT_STATUS value from FT_Write in FTD2XX.DLL

Parameters

dataBuffer	An array of bytes which contains the data to be written to the device.
numBytesToWrite	The number of bytes to be written to the device.
numBytesWritten	The number of bytes actually written to the device.

◆ Write() [2/4]

FT_STATUS FTD2XX_NET.FTDI.Write	(	byte []	dataBuffer,
		UInt32	numBytesToWrite,
		ref UInt32	numBytesWritten
	)

Write data to an open FTDI device.

Returns: FT_STATUS value from FT_Write in FTD2XX.DLL

Parameters

dataBuffer	An array of bytes which contains the data to be written to the device.
numBytesToWrite	The number of bytes to be written to the device.
numBytesWritten	The number of bytes actually written to the device.

◆ Write() [3/4]

FT_STATUS FTD2XX_NET.FTDI.Write	(	string	dataBuffer,
		Int32	numBytesToWrite,
		ref UInt32	numBytesWritten
	)

Write data to an open FTDI device.

Returns: FT_STATUS value from FT_Write in FTD2XX.DLL

Parameters

dataBuffer	A string which contains the data to be written to the device.
numBytesToWrite	The number of bytes to be written to the device.
numBytesWritten	The number of bytes actually written to the device.

◆ Write() [4/4]

FT_STATUS FTD2XX_NET.FTDI.Write	(	string	dataBuffer,
		UInt32	numBytesToWrite,
		ref UInt32	numBytesWritten
	)

Write data to an open FTDI device.

Returns: FT_STATUS value from FT_Write in FTD2XX.DLL

Parameters

dataBuffer	A string which contains the data to be written to the device.
numBytesToWrite	The number of bytes to be written to the device.
numBytesWritten	The number of bytes actually written to the device.

◆ WriteEEPROMLocation()

FT_STATUS FTD2XX_NET.FTDI.WriteEEPROMLocation	(	UInt32	Address,
		UInt16	EEValue
	)

Writes an individual word value to a specified location in the device's EEPROM.

Returns: FT_STATUS value from FT_WriteEE in FTD2XX.DLL

Parameters

Address	The EEPROM location to read data from
EEValue	The WORD value to write to the EEPROM location specified by the Address parameter

◆ WriteFT2232EEPROM()

FT_STATUS FTD2XX_NET.FTDI.WriteFT2232EEPROM ( FT2232_EEPROM_STRUCTURE ee2232 )

Writes the specified values to the EEPROM of an FT2232 device. Calls FT_EE_Program in FTD2XX DLL

Returns: FT_STATUS value from FT_EE_Program in FTD2XX DLL

Parameters

ee2232 The EEPROM settings to be written to the device

If the strings are too long, they will be truncated to their maximum permitted lengths

Exceptions

FT_EXCEPTION Thrown when the current device does not match the type required by this method.

◆ WriteFT2232HEEPROM()

FT_STATUS FTD2XX_NET.FTDI.WriteFT2232HEEPROM ( FT2232H_EEPROM_STRUCTURE ee2232h )

Writes the specified values to the EEPROM of an FT2232H device. Calls FT_EE_Program in FTD2XX DLL

Returns: FT_STATUS value from FT_EE_Program in FTD2XX DLL

Parameters

ee2232h The EEPROM settings to be written to the device

If the strings are too long, they will be truncated to their maximum permitted lengths

Exceptions

FT_EXCEPTION Thrown when the current device does not match the type required by this method.

◆ WriteFT232BEEPROM()

FT_STATUS FTD2XX_NET.FTDI.WriteFT232BEEPROM ( FT232B_EEPROM_STRUCTURE ee232b )

Writes the specified values to the EEPROM of an FT232B or FT245B device.

Returns: FT_STATUS value from FT_EE_Program in FTD2XX DLL

Parameters

ee232b The EEPROM settings to be written to the device

If the strings are too long, they will be truncated to their maximum permitted lengths

Exceptions

FT_EXCEPTION Thrown when the current device does not match the type required by this method.

◆ WriteFT232HEEPROM()

FT_STATUS FTD2XX_NET.FTDI.WriteFT232HEEPROM ( FT232H_EEPROM_STRUCTURE ee232h )

Writes the specified values to the EEPROM of an FT232H device. Calls FT_EE_Program in FTD2XX DLL

Returns: FT_STATUS value from FT_EE_Program in FTD2XX DLL

Parameters

ee232h The EEPROM settings to be written to the device

If the strings are too long, they will be truncated to their maximum permitted lengths

Exceptions

FT_EXCEPTION Thrown when the current device does not match the type required by this method.

◆ WriteFT232REEPROM()

FT_STATUS FTD2XX_NET.FTDI.WriteFT232REEPROM ( FT232R_EEPROM_STRUCTURE ee232r )

Writes the specified values to the EEPROM of an FT232R or FT245R device. Calls FT_EE_Program in FTD2XX DLL

Returns: FT_STATUS value from FT_EE_Program in FTD2XX DLL

Parameters

ee232r The EEPROM settings to be written to the device

If the strings are too long, they will be truncated to their maximum permitted lengths

Exceptions

FT_EXCEPTION Thrown when the current device does not match the type required by this method.

◆ WriteFT4232HEEPROM()

FT_STATUS FTD2XX_NET.FTDI.WriteFT4232HEEPROM ( FT4232H_EEPROM_STRUCTURE ee4232h )

Writes the specified values to the EEPROM of an FT4232H device. Calls FT_EE_Program in FTD2XX DLL

Returns: FT_STATUS value from FT_EE_Program in FTD2XX DLL

Parameters

ee4232h The EEPROM settings to be written to the device

If the strings are too long, they will be truncated to their maximum permitted lengths

Exceptions

FT_EXCEPTION Thrown when the current device does not match the type required by this method.

◆ WriteXSeriesEEPROM()

FT_STATUS FTD2XX_NET.FTDI.WriteXSeriesEEPROM ( FT_XSERIES_EEPROM_STRUCTURE eeX )

Writes the specified values to the EEPROM of an X-Series device. Calls FT_EEPROM_Program in FTD2XX DLL

Returns: FT_STATUS value from FT_EEPROM_Program in FTD2XX DLL

Parameters

eeX	The EEPROM settings to be written to the device

If the strings are too long, they will be truncated to their maximum permitted lengths

Exceptions

FT_EXCEPTION Thrown when the current device does not match the type required by this method.

Property Documentation

◆ IsOpen

bool FTD2XX_NET.FTDI.IsOpen

get

Gets the open status of the device.

The documentation for this class was generated from the following file:

C:/PROJECTS/C#/BSL430.NET/src/BSL430.NET/FTD2XX_NET.cs

Classes

Public Types

Public Member Functions

Properties

Detailed Description

Member Enumeration Documentation

◆ FT_DEVICE

◆ FT_STATUS

Constructor & Destructor Documentation

◆ FTDI() [1/2]

◆ FTDI() [2/2]

Member Function Documentation

◆ Close()

◆ CyclePort()

◆ EEReadUserArea()

◆ EEUserAreaSize()

◆ EEWriteUserArea()

◆ EraseEEPROM()

◆ GetCOMPort()

◆ GetDescription()

◆ GetDeviceID()

◆ GetDeviceList()

◆ GetDeviceType()

◆ GetDriverVersion()

◆ GetEventType()

◆ GetLatency()

◆ GetLibraryVersion()

◆ GetLineStatus()

◆ GetModemStatus()

◆ GetNumberOfDevices()

◆ GetPinStates()

◆ GetRxBytesAvailable()

◆ GetSerialNumber()

◆ GetTxBytesWaiting()

◆ InTransferSize()

◆ OpenByDescription()

◆ OpenByIndex()

◆ OpenByLocation()

◆ OpenBySerialNumber()

◆ Purge()

◆ Read() [1/2]

◆ Read() [2/2]

◆ ReadEEPROMLocation()

◆ ReadFT2232EEPROM()

◆ ReadFT2232HEEPROM()

◆ ReadFT232BEEPROM()

◆ ReadFT232HEEPROM()

◆ ReadFT232REEPROM()

◆ ReadFT4232HEEPROM()

◆ ReadXSeriesEEPROM()

◆ Reload()

◆ Rescan()

◆ ResetDevice()

◆ ResetPort()

◆ RestartInTask()

◆ SetBaudRate()

◆ SetBitMode()

◆ SetBreak()

◆ SetCharacters()

◆ SetDataCharacteristics()

◆ SetDeadmanTimeout()

◆ SetDTR()

◆ SetEventNotification()

◆ SetFlowControl()

◆ SetLatency()

◆ SetResetPipeRetryCount()

◆ SetRTS()

◆ SetTimeouts()

◆ StopInTask()

◆ VendorCmdGet()

◆ VendorCmdSet()

◆ Write() [1/4]

◆ Write() [2/4]

◆ Write() [3/4]

◆ Write() [4/4]

◆ WriteEEPROMLocation()

◆ WriteFT2232EEPROM()

◆ WriteFT2232HEEPROM()

◆ WriteFT232BEEPROM()

◆ WriteFT232HEEPROM()