Module lib.tools.support

List the supported configuration according to the hardware

# Distributed under Pycameresp License
# Copyright (c) 2023 Remi BERTHOLET
""" List the supported configuration according to the hardware """

import sys

def telnet():
        """ Indicates if telnet is supported by this hardware """
        if sys.platform == "rp2":
                return False
        return True

def hostname():
        """ Indicates if hostname can be used by this hardware """
        return True

def static_ip_accesspoint():
        """ Indicates if static ip on access point can be used by this hardware """
        if sys.platform == "rp2":
                return False
        return True

def battery():
        """ Indicates if battery setup supported """
        if sys.platform == "rp2":
                return False
        return True

def counter():
        """ Indicates if hardware counter supported """
        if sys.platform == "rp2":
                return False
        return True

Functions

def battery()

Indicates if battery setup supported

Expand source code

def battery():
        """ Indicates if battery setup supported """
        if sys.platform == "rp2":
                return False
        return True

def counter()

Indicates if hardware counter supported

Expand source code

def counter():
        """ Indicates if hardware counter supported """
        if sys.platform == "rp2":
                return False
        return True

def hostname()

Indicates if hostname can be used by this hardware

Expand source code

def hostname():
        """ Indicates if hostname can be used by this hardware """
        return True

def static_ip_accesspoint()

Indicates if static ip on access point can be used by this hardware

Expand source code

def static_ip_accesspoint():
        """ Indicates if static ip on access point can be used by this hardware """
        if sys.platform == "rp2":
                return False
        return True

def telnet()

Indicates if telnet is supported by this hardware

Expand source code

def telnet():
        """ Indicates if telnet is supported by this hardware """
        if sys.platform == "rp2":
                return False
        return True