WiFi Manager

Welcome to the SharpKey WiFi Manager page.

This page allows you to configure the SharpKey WiFi Access Point (you connect to the SharpKey) or Client (SharpKey connects to your network) mode.

WiFi Configuration

SSID:	%SK_APSSID%
Password:	%SK_APPWD%
IP (AP):	%SK_CURRENTIP%	NETMASK:	%SK_CURRENTNM%	GATEWAY:	%SK_CURRENTGW%

SSID:	%SK_CLIENTSSID%
DHCP:	Enabled
IP (assigned):	%SK_CURRENTIP%	NETMASK:	%SK_CURRENTNM%	GATEWAY:	%SK_CURRENTGW%
IP (fixed):	%SK_CURRENTIP%	NETMASK:	%SK_CURRENTNM%	GATEWAY:	%SK_CURRENTGW%

Configure WiFi

WiFi Mode:

Access Point

Client

SSID:		Name of Wifi router to use.
Password:		Password of WiFi router.
DHCP Mode:	Enabled	Disabled
IP Address		Static IP address to assign to SharpKey
Netmask		Netmask for Static IP
Gateway		Gateway or router IP Address (if needed).

DHCP Mode enabled.
The SharpKey will use the credentials specified above (SSID/Password) to connect to the router and obtain an IP address, Netmask and Gateway. Use your router admin page to determine the IP address allocated and connect to the SharpKey via http://<assigned IP>

%SK_ERRMSG%

SSID		Name of this WiFi Access Point.
Password		Password required by this AP to authenticate clients.
IP Address		IP address assigned to this Access Point. ie. 192.168.4.1
Netmask		Netmask of this AP network.
Gateway		Gateway this AP will assign to a client. Normally same as IP.

%SK_ERRMSG%