WELCOME TO BIO PROTECH APP

USER MANUAL

CONNECT TO YOUR PARK MED

Make sure your Park Med is on.
The green LED on the Park Med will indicate if it is turned on.
The red LED will indicate if Park Med is prepared to connect.
If the red LED is on, go back to the Home Page, open the Menu and click on the Bluetooth Button.

If the connection is successful the red LED will turned off the Bio Protech's logo will turn green.
If the connection isn't successful see ADDING NEW DEVICE section.

ADDING NEW DEVICE

If you have a new Park Med or your Park Med stopped connecting.
Go to the Settings Page by clicking on the Settings

Inside of the Settings Page, click on 'SELECT A DEVICE'.
After a few seconds, the nearby Park Meds will show up.
Tap on one of the available devices and a message will appear saying the Park Med is saved.
Your Park Med will be registered and ready to connect.

USING VIBRATIONS

Ensure your Park Med is connected. If it isn't check the CONNECT TO YOUR PARK MED sections.
To start the vibration, go to the Home Page and click on the START button.
To stop the frequency, click on the STOP button.
To change the frequency, use the slider tool to select the frequency needed. The slider is programmed to change the frequency as soon as you release it.

TREMOR GRAPH

Ensure your Park Med is connected. If it isn't check the CONNECT TO YOUR PARK MED sections.
To check the tremor graph, go to the Graph Page by clicking on the Graph in the menu.
After a few seconds, the tremor data will be displayed.
To stop the graph, close the Graph Page.

Plase note, the graph doesn't provide accurate data!

SAVING GRAPH

While the graph is displaying data.
Click on the Save button to turn on the recording.
To turn off the recoding, click on the Save button again.
The file will be saved inside of a Bio Protech folder on the internal memory of your smartphone.
Those files can be be used on an external website to see the recorded data.
Bio Protech reccommends the online graph maker Plotly.com