# You can use this script unmodified to connect to cellular networks.
# The APN is specified in the peers file as the argument of the -T command
# line option of chat(8).

# For details about the AT commands involved please consult the relevant
# standard: 3GPP TS 27.007 - AT command set for User Equipment (UE).
# (http://www.3gpp.org/ftp/Specs/html-info/27007.htm)

ABORT           BUSY
ABORT           VOICE
ABORT           "NO CARRIER"
ABORT           "NO DIALTONE"
ABORT           "NO DIAL TONE"
ABORT           "NO ANSWER"
ABORT           "DELAYED"
ABORT           "ERROR"

# cease if the modem is not attached to the network yet
ABORT           "+CGATT: 0"

""              AT
TIMEOUT         12
OK              ATH
OK              ATE1

# +CPIN provides the SIM card PIN
#OK             "AT+CPIN=1234"

# +CFUN may allow to configure the handset to limit operations to
# GPRS/EDGE/UMTS/etc to save power, but the arguments are not standard
# except for 1 which means "full functionality".
#OK             AT+CFUN=1

OK              AT+CGDCONT=1,"IP","zp2.gota.net"
OK              ATD*99#
TIMEOUT         22
CONNECT         ""
